Call for aid
Call for aid inspection software
The emergency pull cord beside an accessible toilet, and the lamp-and-buzzer housing outside that restroom door. Its own discipline, its own report, twelve checks per station.
Checks in the order you actually walk them
Seven checks inside the restroom first: cord attached, reachable from the toilet, hangs to the floor, undamaged, unobstructed, and the instruction plate legible and securely mounted. Then five outside the door: lens in place, housing secure, and — pulling the cord — light illuminates, buzzer sounds, and it resets correctly afterward.
The sequence matches how the job is really done, so nobody walks in and out of the same restroom twice.
A discipline in its own right
Call for aid is not buried inside the fire alarm report. Each station is set up on the property with a station number, location description, optional floor, and the unit’s voltage — 24 VDC or 120 VAC — and produces its own inspection and its own report.
Do it on the same visit as fire alarm, emergency lighting and extinguishers and you get each report plus a combined one.
Common questions
- Is call for aid included, or an add-on?
- Included. All four disciplines are in the one flat rate — there are no per-discipline modules to buy, and the ones in the works will land the same way.
- Can one visit cover several disciplines?
- Yes. A single property visit can carry fire alarm, emergency lighting, fire extinguishers and call for aid together, each with its own report plus a combined report.
The other disciplines
One visit can cover every discipline the property has, each with its own report plus a combined one.